Make	:	Select...
Model	:	Select...
Year	:	Select...
Part	:	Select...

Custom Tail Lights

Save money on your custom tail lights

If you intend to replace your old tail lights, then there is no need to take your vehicle to auto repair shop. You can accomplish this task at your own. With few simple tools you can perform this easy task. Following are the steps that can guide you to do it in faster and easier manner. At first you must have replacement auto taillights. You can take aid of online stores in this concern. After you get replacement tail lights you can start with the task. You need to disconnect battery. This is very good safety precaution, while dealing with electric components. At first, you have to take out carpeting in the trunk so as to get easy access for the back of the light. After doing this you are able to see the back of the light. Now it is needed to recognize wires that lead to the rear of the lights. After this unplug these wires. In addition, you have to take out the bolts and screws that hold the tail lights in its appropriate position.

The next step you have to follow is to take out the light. Remember to do this with great caution and care. Keep in mind that there can be black weather strips which need to be removed by gently pushing on the tail lights. They simply hold the tail light in proper position. In addition it prevents entry of water in the trunk region. To do this, you can make use of hair dryer or other such kind of instrument. You have to heat up the stripping. Due to heat the stripping will become gooey, now it is possible to slowly take out the entire light assembly. Remember the entire piece should come out as single unit. You have to hold it by one hand whilst doing this.

After taking out the entire unit you can now start to install the new custom tail lights. Keeping in mind that water should not enter into your trunk, it is always desirable that you place a lot of new weather stripping in the region of the light. This will surely help to keep the light in proper position along with keeping the water out.

Now you can start to re-install. What you need to do is just slide the new light in proper position, and replace the bolts and screws. Ensure for the tight fitment. This is essential as water could leak in otherwise. After this you can place the lights back in properly. Now when the light bulbs are re-installed, you have to test that everything functions well. You must check all hazard lights, turn signals, reverse lights, parking lights and brake lights. Here it completes the procedure for replacement of custom tail lights.

You can get lots of information regarding this online free of cost. By means of car repair manuals, auto guides you can do it at your own in much affordable manner. You can get auto parts, auto tail lights, car taillights, LED taillights, rear taillights, custom tail lights at Automotix reviews.

TAIL LIGHT, CLEAR AND RED PLASTIC LENS, DRIVER SIDE

TAIL LIGHT ASSEMBLY, CLEAR AND RED PLASTIC LENS, DRIVER SIDE

TAIL LIGHT ASSEMBLY, CLEAR AND RED PLASTIC LENS, PASSENGER SIDE

IPCW TAIL LAMPS, LED

TAIL LIGHT, CLEAR AND RED PLASTIC LENS, DRIVER SIDE

Make:

Model:

Select..

Year:

Select...

Part:

Select...